Honeywell HZ-0360 Fan Forced Heater Manual

Honeywell HZ-0360 Fan Forced Heater Manual
Read all Honeywell HZ-0360 Fan Forced Heater Manual instructions before using this heater. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Yes, always use handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and the back. Extreme caution is required when any heater is used by or near children, pets or invalids, or when the heater is left operating and unattended. Always unplug heater when not in use. Do not operate any heater with a cord or plug or after the heater malfunctions, it has fallen or is damaged in any way. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never place the heater where it may fall into a bathtub or other water container. 

Do not run the cable under the carpet. Do not cover the cable with rugs, runners or the like. Place the cord away from traffic area where not firing. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is designed to fit only a way in a polarized outlet. If the plug does not fit securely into the outlet, reverse the plug. If it still does not fit, please contact a qualified electrician. This heater draws 12.5 Amps during operation when it is set on high. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. -It is normal for the plug is hot to the touch; However, setting loose between the CA (receptacle) and plug may cause overheating and a distortion of the plug. Please contact a qualified electrician to replace loose or worn outlet.

To disconnect the heater, first turn off the product, then you hold the plug and pull it from the wall outlet. Never yank the cord. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as that could cause an electric shock or fire, or damage the heater. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, or where openings may be blocked. A heater has hot and arcing inside parts. Do not use it in areas where it is used or stored gasoline, paint, or flammable liquids. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you must use an extension cord, the cable must have a minimum size of 14 AWG and must not be less than 1875 Watts. The extension cord must be a cable of three wires with a plug connector and ground wire. Never tamper with this product or attempt to fix it. Any manipulation or modification of this product can cause serious injury, death, or fire. Risk of electric shock. Do not open no user-serviceable parts.

Do not remove product labels that contain warnings or safety instructions. The output of this heater may vary and its temperature may quickly become intense enough to burn exposed skin. The use of this heater is not recommended for persons with reduced sensitivity to heat or inability to react to avoid burns. Before cleaning it or save it, or when it is not in use, turn the fan to the off position and unplug the heater from the electrical outlet and allow it to cool. Place the heater on a firm, level, open surface, free of obstructions and a minimum distance of 3 feet (0.9 m) of any combustible material. Do not use on an unstable surface, such as bedding or deep carpets. Make sure that the heater is not in a position that can trip with small children or pets. Heater rubber feet keep it firm in its position. If your House has aluminum wiring, have a licensed electrician to check the connections from its socket. When using any heater 1500 Watt, aluminum wire connections can cause a security problem.

0 Response to "Honeywell HZ-0360 Fan Forced Heater Manual"