Linksys PAP2T Manual

Use of this Linksys PAP2T Manual installation and troubleshooting guide or quick installation instructions to help you to connect the phone adapter after configuring an account with Vonage. These instructions should be everything you need to make the most of the telephone adapter. This telephone adapter will allow you to make calls telephone or fax using the broadband connection. How does the phone adapter do this? The telephone adapter connects your phones or fax machines to your network or gateway router, so the phone service is delivered through your cable or connection DSL Internet. Each telephone phone adapter plugs operates independently, with separate phone numbers and phone service, so you can have up to two lines of Vonage phone adapter. But, what is all this? Networks are useful tools to share access to the Internet and computer resources. With the phone adapter, their phones or fax machines can share your high-speed Internet connection and take advantage of it. You can make phone calls using the account configured with Vonage, even while surfing the Internet. Therefore, the networks are not only useful in homes and offices but can also be fun.

Instructions for connecting the telephone adapter if you have already set up an account with Vonage, go to step. If you don't have an account, please visit www.vonage.com to activate the telephone adapter. After you set up an account, proceed to step. Using a telephone cable, connect your phone to the PHONE 1 port of the phone adapter. If you have a second line of Vonage account, connect another phone or fax to the PHONE 2 port of the phone adapter. Connect the Ethernet network cable to the ETHERNET port of the phone adapter. Connect the other end to one of the ports from your router or gateway Ethernet. Connect the power adapter included to the POWER port on the back panel of the phone adapter. Connect the other end to a standard electrical outlet. LED power supply, Ethernet, and phone are solidly lit when the phone adapter is ready for use. Follow the instructions provided by Vonage. If you need to manually configure the network configuration of the telephone adapter, you can use the phone; For instructions, go to the "Chapter 4: use of the interactive menu of the voice of the telephone adapter response".

The phone adapter includes a ringing (ringing signal generator), which is a source of dangerous voltage. When the ringer is activated by an incoming call, do not touch the phone port cables, cables of a cable connected to either of the ports of the phone or the internal circuitry of the phone adapter. Do not connect any port on the phone to a phone wall jack. Make sure that you connect only a phone or fax any of the ports of the phone. Otherwise, the phone adapter or telephone wiring in your home or office may be damaged.

Download Linksys PAP2T Manual

Tweet