This Honeywell HW2000i Manual contains important instructions for operating this generator. For your safety, and the safety of others, be sure to read this manual thoroughly before operating the generator. Failure to properly follow all instructions and precautions can cause you and others to be seriously hurt or killed. Please use the spaces provided below to record important information about your generator. You may be asked to provide this information should you require product service or support. Identification information specific to your generator (model number and serial number) can be found on the generator nameplate. Anyone using or servicing this generator must read, understand, and follow all safety and operation instructions provided in the product manual. Failure to closely follow these instructions can result in circumstances leading to death, serious injury, and property damage.
Since there are many variations in the circumstances surrounding the installation, operation, service, and maintenance of this generator, we cannot possibly anticipate or provide advice or safety messages to cover every situation. Safety messages are provided throughout this manual to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level. Danger is indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders. Warning is indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Caution is indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor injury to the operator or to bystanders. Notice is indicates a situation which, if not avoided, may result in damage to the generator components.
There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction. In some areas, generators are required to be registered with local utility companies.If generator is used at a construction site, there may be additional regulations which must be observed. A transfer switch is a device that allows switching from utility power to emergency generator power. The transfer switch is either a manual switch, an automatic switch, or a combination of manual and automatic. During a power outage, the transfer switch isolates emergency circuits from the utility line, allowing for efficient operation of the generator without back-feeding into utility power.
Download or view Honeywell HW2000i Manual below
0 Response to "Honeywell HW2000i Manual"