After you configure the Philips SRP5107 Universal Remote Control you can operate up to 7 different devices with it. The universal remote control comes with the innovative technology Simple Setup. After installation, the SRP5107 can operarTV, DVD Player / Recorder (including Blu-ray player), VCR, DVR, HD, ancillary equipment and all the common channels of cable, satellite, DTV and other decoders as DirecTV, Comcast, AT & Verizon, Time Warner, Scientific Atlanta, TiVo, and many more. Simply follow the instructions in section 2.3 to set up the remote control of your devices. We have focused on making this remote control friendly consumer. We have highlighted the buttons DVR (TiVo / Replay) in blue for easy reference on your keyboard. The remote control is equipped with the most common functions for the operation of your devices. However, if you lose certain functions, this remote control can "learn" these functions from the original remote control.
Inser t 2 AA batteries, noting the settings + and - in the battery compartment. When replacing the batteries, all user settings will be retained in the memory of the remote control for an unlimited period of time. It is advisable to test whether your (s) device (s) already responds to the SRP5107 before you configure it (see section 2.3). The following example shows how to do it to suTV. You can repeat the same steps for other devices (DVR, Player / DVD recorder, cable/satellite, DTV, HD and VCR, auxiliary equipment) that you want to use with the SRP5107. The following example shows you how to set up your universal remote for your TV can repeat the same steps for other devices (DVR, Player / DVD recorder, cable/satellite, DTV, HD and VCR, auxiliary equipment) you want to operate using the universal remote control.
Some combined devices (e.g. TV / DVR, learnTV / DVD, DVD / DVR, etc.) have buttons separated into the original remote control to select the part of the combo device to be controlled. For example, if your combo device is a DVD / DVR, your original remote control may have buttons, separate DVR and DVD to select the combined part that you want to operate. The equivalent button functions can be found on the Philips remote control by selecting the device buttons. It may happen that the learning of a button's function fails the first time. The red light of configuration C SUBTITLE INST. REPLAY ADVANCE REPEAT INPUT MUTE VCR LIVE TV TV DVR DVD CBL SAT HD AUX SELECT OK L1 L2 PREV. CH PP SELECT OK PPPP 1 4 7 2 5 8 0 3 6 9 Q.SKIP ENTER LEARN POWER INPUT MUTE INST. REPLAY L1 will give 4 short flashes and turns off. In this case, try again. If you still have problems to learn the functions of the buttons, check the batteries in SRP5107 and the original remote control and replace it if necessary. It can also be the memory of remote memory is full (you can learn a total of approximately 60 buttons). In this case, you can restore one or more buttons to their original functions to create space in the memory. To do this, see Chapter 3.4.
0 Response to "Philips SRP5107 Universal Remote Control Manual"