Panasonic SDR-S50 Manual

Before use Panasonic SDR-S50 Camcorder, please read these instructions completely. The outlet should be installed near the equipment and easily accessible. The network of the power cord plug must be easily operable. To completely disconnect this apparatus from the AC mains, disconnect the power cord from the AC receptacle. The risk of fire, explosion, and burns. Do not disassemble, heat above 60 xC or incinerate. Use only the recommended accessories. Do not use other AV cables and USB cables except the supplied. A USB cable with the SDR-S45 is not supplied. Only use original USB cable for Panasonic. Keep the card memory out of the reach of children to prevent swallowing. How to replace fuse location differs depending on the type of CA (figures A & B) mains plug. Confirm the AC plug and follow the instructions below. The illustrations may differ from the current plug of the AC mains. Open the cover of the fuse with a screwdriver. Replace the fuse and closing or attach the fuse cover. Panasonic accepts no liability for direct or indirect damages due to any type of problems that result in loss of recording or edited content and does not guarantee any content if the recording or editing does not work properly. In the same way, this also applies in a case in which any type of repair is done to the unit (including any other non-built-in memory / HDD related component).

This unit is equipped with 8 GB of built-in memory. When you use this component, pay attention to the following points. This unit is equipped with 4 GB built-in memory. When you use this component, pay attention to the following points. Backup the data periodically. The built-in memory is temporary storage. To avoid erasing data due to static electricity, electromagnetic waves, break and bugs make a backup of the data on a PC or DVD disk. (77, 84). Access [ACCESS] lamp (9) lights up while you access the SD card of built-in memory (initialization, recording, playback, delete, etc.). Do not perform the following operations when the lamp is lit. It may damage the built-in memory or cause a malfunction in the unit. Turn off the battery (remove battery) jInstale and remove the USB cable jExponga the unit to vibrations or shocks. About to get rid of this unit or give away it. (108).

This unit is equipped with the built-in hard disk of 120 GB. While the hard drive is capable of storing a large amount of data, there are some things to keep in mind. When you use this component, pay attention to the following points. This unit is equipped with the built-in 80 GB hard drive. While the hard drive is capable of storing a large amount of data, there are some things to keep in mind. When you use this component, pay attention to the following points. Do not expose the hard drive to vibration and shock. Due to the environment already driving conditions, the HDD may be subject to partial damage or may not be able to view, record and playback data. Do not expose the unit to vibrations or shocks, and do not turn off the unit during recording or playback. If the unit is used in a place with strong, like a club or a place sounds, recording can be stopped due to the vibration of the sound. In these places, the recording of data on an SD card is recommended. Backup the data periodically. The HDD is temporary storage. To avoid erasing data due to static electricity, electromagnetic waves, break and failures of backup data to a PC or DVD. (77, 84).

 Download Panasonic SDR-S50 Manual

Tweet