With headphones turned off, & within 1 meter (3 feet) of music device, press & hold center key for more than 4 seconds until you see alternating red/green flashing of the status indicator and a voice prompt saying “Searching for your music device”. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices (see instructions in the phone/music device manual for details). Check for “BlueBuds X” and select (enter passcode 0000 if prompted). BlueBuds X voice prompt will say “headphones connected”. If the pairing is not successful, switch off headphones by pushing the center key for more than 4 seconds and repeat the steps outlined above. Place headphones and mobile phone within 1 meter (3 feet) of each other. Put the headphones into pair mode as outlined on prior page. If using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual). Plug the Bluetooth adapter into the music device and play a song. The headphones and adapter will pair automatically (passcode of adapter must be 0000). 6. After successful pairing and connecting, the headphones will say “Headphones connected”.
Paired devices will remember each other unless pairing information is deleted, so there is no need to pair again. BlueBuds X can pair and remember 8 phone/music devices. Repeat the steps outlined on prior pages to set-up your headphones with another phone/music device. Note that if a 9th phone/music devices is paired the oldest pairing information is deleted. BlueBuds X will connect with the latest connected device. If you want to use another paired phone/music device, switch off the Bluetooth function of the current Bluetooth device, and then connect it with the other phone/music device by selecting “BlueBuds X” in the Bluetooth device list and press connect. Turn the originally paired device back on to reconnect and switch between either of the devices.
Jaybird Bluebuds X Specifications
| Bluetooth Version | V2.1 + EDR (newer versions offer no benefits for headphones) |
| SBC Codec | Customised SBC codec offers high fidelity without needing APT-X |
| Profile | Handsfree v1.6, Headset v1.1, A2DP v1.2 and AVRCP v1.4 |
| Effective Range | 10 meters (30 feet) |
| Working Time | Music & calls up to 8 hours |
| Standby Time | Up to 250 hours |
| Input Voltage | DC 5V 100mA |
| Charging Time | Approximately 2 hours |
| Dimensions | 23 x 13 mm earbud size, 540 mm cord length |
| Weight | Approx 13 g |
0 Response to "Jaybird Bluebuds X Manual"