Introduction Samsung Intercept this section describes information about how to manage the device, maximize performance, and create a Google account. Installation of the battery. Remove the battery from its packaging. Firmly grasp the device and locate the cover release latch. Place the nail into the opening and firmly press the lid of the device (similar to a can of soda). Insert the battery into the opening on the back of the device, make sure that the connectors are aligned. Gently push down to secure the battery. Place the battery on the battery compartment cover and press down until you hear a click. Removing the battery make sure that the power is off so that you don't lose any number or stored message. Place the nail at the top of the battery and firmly close the lid of the device (similar to a can of soda). Carefully remove the battery from the device. Warning!: do not handle a damaged Li-Ion battery or leaking, that may be burned. Charging the battery. It is important to keep track of the battery charge. If the battery level becomes too low, the device will automatically shut off and will lose the information that was working. Although the battery is partially charged. It is recommended to fully charge the battery before using the device for the first time.
Use only batteries and Chargers approved by Virgin Mobile or approved by Samsung with your device. The lack of use of a battery and a charger approved by Virgin Mobile or approved by Samsung may increase the risk of the device from overheating, fire or explode, causing serious bodily injury, death or property damage. Batteries and accessories approved by Virgin Mobile or approved by Samsung can be found in stores or through Samsung; Or call 1-866-866-7509 to order. They are also available at www.virginmobileusa.com. Battery capacity your device is equipped with a lithium ion (Li-Ion) battery. It allows you to recharge the battery until it is fully drained. The battery provides up to 5 hours of continuous digital talk time. With 3% of carrying capacity, there are only a few minutes of talk time, the device emits an audible alert and shows an icon of loads (critical) and then shuts off. Settings backlight long, search for service, vibrate mode, using the browser and other variables can reduce times of conversation and wait for the battery. Note the device battery level indicator and charge the battery before it runs out.
Applications currently running, light levels, the use of Bluetooth and GPS functionality acting to drain the battery. The following is a list of tips that can help you conserve battery power: to reduce the time of illumination. See "Change of the duration of the backlight time" on page 104 turn off Bluetooth when not in use. See "Activating and deactivating Bluetooth" on page 83 turn off Wi-Fi when not in use. See "Activating and deactivating of Wi-Fi" on page 91 correct charger / incorrect sensor accessory. Turn off GPS when not necessary. Most of the applications that use this function periodically consult GPS satellites for its current location; Each query drains your battery. See "Location mode activation" on page 78 do not wait until the battery has run out completely before charging the device. The repetition of this process of full discharge and recharge may eventually reduce the storage capacity of any battery. Disable the automatic synchronization of the application. See "Account synchronization" on page 105 use the power control Widget to disable hardware features like Wi-Fi, Bluetooth, GPS, sync or adjusting brightness of the LCD screen. See "Adding and removing widgets" on page 23. Check the services running and close unnecessary applications. See "Managing services running" on page 116.
0 Response to "Samsung Intercept Manual"